DeoxIT D100L-25C (25ml)

DeoxIT® D-Series – Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant

Part No. D100L-25C: 100% Liquid, No solvents, 25 mL

Applicator: Precision Needle Dispenser, provides NO flushing action, applies 100% DeoxIT®.
Formulation: 100% DeoxIT®.

Use: When contact and connector are easily accessible. No flushing action.

Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.

More than a Contact Cleaner… Improves & Protects Connections!

DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% deoxidizing action.

KEY FEATURES:

• Improves Conductivity
• Deoxidizes, Lubricates and Protects
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• * Temperature Range, -34 C (-29 F) to +200 C (400 F)

* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer